HomePropulsion TechnologiesElectric PropulsionThe Power Plant Hidden on the Propeller Shaft

The Power Plant Hidden on the Propeller Shaft

What The Switch claims, what the evidence shows

中文版本 / Read in Chinese

TL;DR

  • A permanent magnet (PM) shaft generator takes on-board power from the main engine, which burns less fuel per kWh than the auxiliary gensets it replaces.
  • The Switch says it had sold nearly 600 marine PM machines by June 2026. Its September 2026 press deck puts orders at 676. Both are company figures.
  • Independent sources support the physics, but at a smaller scale than the brochure: IMO puts typical total emission cuts from shaft generators at 1-5%.
  • The flagship DC reference, the battery ferry China Zorrilla, reached Uruguay in September 2026 and is not yet in commercial service.
  • The strategic question is the magnets: China made 94% of the world’s sintered permanent magnets in 2024.

Most deep-sea ships run two power plants at sea. A large two-stroke main engine turns the propeller, and a set of smaller four-stroke gensets makes electricity for pumps, reefers, cranes and accommodation. The main engine is the more efficient of the two. The Switch, a Finnish maker of electric machines owned by Japan’s BEMAC, has built its marine business on that gap: mount a generator directly on the propeller shaft and let the main engine carry the hotel load.

The company presented its marine portfolio to journalists during the Blue-C press tour in Bergen in September 2026. maritime-innovations.com checked the key claims in that presentation against company releases, class and regulatory sources, owner statements and trade press. The short version: the technology is real and selling fast, the headline numbers need context, and the most interesting open question sits in the rotor.

The physics behind the pitch

A PM shaft generator sits inline on the propeller shaft between main engine and propeller. The rotor carries permanent magnets instead of excitation windings, so there is no gearbox, no slip rings and less heat to remove. A converter, either a stand-alone drive or The Switch’s DC-Hub, turns the variable-frequency output into stable ship power, which lets the generator work across the full speed range of the engine.

The Switch states that a two-stroke main engine is typically 10-20% more fuel-efficient than auxiliary gensets. Independent sources confirm the direction but not a universal band. IMO’s GreenVoyage2050 programme and MAN Energy Solutions both describe the lower specific fuel consumption of large two-stroke engines as the reason shaft generation saves fuel. ABB Marine & Ports, a customer of The Switch that signed a five-year supply agreement for its PMM2000M machines in 2022, stated in its November 2022 COSCO order announcement that PM shaft generators offer 3-4% higher efficiency than conventional synchronous shaft generators and up to 17% better fuel efficiency than auxiliary gensets during voyages. Because ABB builds its systems around The Switch machines, this is not an independent measurement, but it shows a major system integrator working with figures close to The Switch’s own.

“The main engine is typically 10-20% more fuel-efficient than auxiliary generators.”

The Switch, press presentation, Blue-C press tour Bergen, September 2026
~600
Marine PM machines sold, per The Switch, June 2026
1.5 MW
Rating of the first four PM shaft generators, ordered in 2014
40+ MWh
Battery on China Zorrilla, connected through The Switch DC protection
94%
Share of global sintered permanent magnets made in China, 2024 (IEA)

From four machines to several hundred

The programme is more than a decade old. In February 2014 the Finnish integrator WE Tech ordered four 1.5 MW PMM1000 machines from The Switch for Wallenius car carriers at Tianjin Xingang. The first units passed back-to-back factory tests in Vaasa in November 2014 under Lloyd’s Register. Which ship actually commissioned the first serial machine at sea is less clear: the first Xingang vessel, Titus, was delivered in 2018, while Terntank’s Ternsund has been described as the first WE Tech PM shaft generator in operation around 2016. The Switch’s “world’s first MW-class PM shaft generator delivered in 2015” is therefore a date without a public hull name.

The growth since then is well documented in the company’s own releases: more than 270 orders in November 2023, more than 500 in September 2025, and “nearly 600 sold, around 400 in operation” in June 2026. The September 2025 milestone came with an order for 12 PMM2000M machines, each rated 4,210 kW at 50 rpm, for an 18,200 TEU container ship at a Korean yard.

The Bergen presentation goes further: 676 machines ordered, 409 delivered, 585 vessels, 81 shipowners, 58 shipyards in six countries. By vessel type, containerships account for 42% of orders, gas carriers for 25% and tankers for 17%. These figures are plausible as a later snapshot of the same order book, but they do not appear in any public release. They should be read as company data until The Switch publishes the cutoff date and definitions, in particular whether “machines” covers only shaft generators or also propulsion motors and gensets.

What the savings claims can and cannot prove

The deck promises fuel savings of 2-8%, a payback of 1-4 years and lifetime savings of EUR 5-15 million compared with genset solutions, or EUR 2-4 million compared with conventional shaft generators. None of these euro figures could be traced to owner data, class papers or peer-reviewed work. The company’s own public material is more cautious: its FAQ gives a typical payback of 2-4 or 3-4 years, depending on the document.

Independent estimates are smaller but not dismissive. IMO GreenVoyage2050 puts typical total emission reductions from shaft generators at 1-5% and installation costs at around USD 450 per kW, or roughly USD 0.5-3.5 million per vessel. A 2025 modelling study in the journal Energies (Tadros et al., University of Strathclyde) calculated fuel savings of 0.1-0.5 tonnes per day for a 200 m bulk carrier with 300-600 kW of electrical load, up to 150 tonnes a year, and a median payback of roughly 1-2.5 years on heavy fuel oil. That supports the lower end of the deck’s payback range, but it is a model, not measured fleet data. The honest range depends on the baseline: replacing auxiliary gensets on a ship that runs long ocean passages is a different case from replacing an older shaft generator on a feeder.

Reliability claims need the same care. The company reports zero failures leading to drydocking or machine replacement. No class or casualty report contradicting that was found, but the absence of published failures is not the same as independent verification. The deck’s “close to 10 million operating hours” also sits well above the 5-7 million hours The Switch published between April and September 2026 for its marine PM fleet.

Reference ships: who supplied what

The Switch is a product supplier. It does not contract with shipyards directly but sells machines, drives and DC systems to system integrators and OEMs such as WE Tech, Wärtsilä, Berg Propulsion, ABB, Kongsberg and Vard. The ships below are references for its products. How a ship performs overall also depends on the integrator’s system design.

“We take our role as a product supplier seriously, helping our customers deliver complete systems and solutions to their customers.”

The Switch, press presentation, September 2026

China Zorrilla (Buquebus, Incat Hull 096). The 130 m aluminium catamaran for about 2,100 passengers and 225 cars carries a Corvus battery of more than 40 MWh, reported at 41-43 MWh depending on the source. Wärtsilä is the electrical integrator and supplied the waterjets. The Switch supplied the DC-Hubs, the Electronic Current Limiter and Battery Short-Circuit Limiter that allow the large battery to be connected safely, and the power electronics for shore charging. The ship was loaded onto the heavy-lift vessel Black Marlin in Hobart around the start of August 2026 and arrived in Uruguay in September. Commissioning and entry into service are still pending. No problem with The Switch hardware has been reported, but the ferry is not yet a performance reference.

North Sea Giant (North Sea Shipping). The DP3 subsea construction vessel was converted to hybrid operation in 2019, with Wärtsilä as integrator and Corvus batteries. The Switch supplied the first Electronic Bus Link, which connects the DC-Hubs in a closed ring and splits the grid within microseconds if a fault occurs. DNV reported that the vessel can keep DP redundancy with one engine running and cut diesel engine running hours by roughly one third. The press presentation cites 1,977 tonnes of diesel saved since 2019; this figure could not be matched to owner or class data.

CSL Nukumi (Canada Steamship Lines). The 26,000 dwt self-unloader built by Chengxi Shipyard entered Great Lakes service in 2022 with Berg Propulsion’s direct-drive system. The Switch supplied variable-speed PM gensets, DC-Hubs and bearingless propulsion motors of about 3 MW that use the shaft-line bearings instead of their own. CSL reports about 25% lower greenhouse gas emissions and 80% fewer harmful air pollutants than the predecessor vessel on the route.

Where the machines are built

The ownership has changed twice in three years. Yaskawa sold The Switch in February 2024 to BEMAC, the Imabari-based marine electrical supplier founded in 1946, as majority owner, with Mitsui & Co. as minority partner. On 15 May 2026 BEMAC signed an agreement to buy out Mitsui, and The Switch now describes BEMAC as its sole owner, with a continued strategic partnership with Mitsui. The price was never disclosed. According to The Switch, BEMAC holds a market share of over 50% in the Japanese shipbuilding industry. The Switch continues to operate as an independent company with global responsibility for its products and business.

The Switch builds its marine PM machines today in two places: Lappeenranta in Finland, which also hosts a test centre for drives up to about 18 MW, and Nanjing in China. Power electronics, including DC-Hubs, drives and the protection devices, come from Vaasa in Finland and Stord in Norway, where the company also takes part in the STEESMAT low-voltage DC test network. In Nanjing, a long-standing manufacturing partner has expanded its role to include manufacturing of selected complete machines for Chinese market applications. The customer list in the deck is dominated by Chinese and Korean yards. The Switch states that Finnish and Chinese machines are identical and tested to the same procedures, a claim that has not been independently audited.

The magnet question

Every PM rotor depends on neodymium-iron-boron magnets. According to the International Energy Agency, China supplied 60% of mined magnet rare earths, 91% of refined output and 94% of sintered permanent magnets in 2024. Since April 2025 Beijing has required export licences for seven medium and heavy rare earths and for magnets containing them, including dysprosium and terbium, which high-temperature machine grades typically need. A broader extension announced in October 2025 was suspended in November 2025 until 10 November 2026, weeks after this article’s publication. Magnet exports to Europe have largely recovered since then, while shipments to the United States remain below 2024 levels. Exporters describe licensing friction and volatile monthly flows rather than a ban.

Neither The Switch nor BEMAC has commented publicly on magnet sourcing, dual sourcing or dysprosium-free grades. For a buyer, this is less about the price of one machine and more about lead times for newbuild programmes. A replacement rotor is not a routine concern: according to The Switch, it has never needed to replace a rotor in its machines, and magnets do not degrade in normal operation. The dependence on rare-earth magnet supply is an industry-wide issue affecting all permanent magnet machine manufacturers and is not specific to The Switch.

Regulation helps, but less directly than the brochure suggests

Under IMO’s EEXI and EEDI rules, shaft generator output can be calculated with main engine fuel consumption rather than auxiliary engine consumption, which improves the attained index on paper. CII is different: it is an operational rating, and a shaft generator improves it only through fuel actually saved in trading. Under the EU ETS, which reaches 100% surrender for 2026 emissions, every tonne of fuel not burned on covered voyages reduces allowances, but there is no technology-specific credit. FuelEU Maritime measures the greenhouse gas intensity of the energy used, so a shaft generator running on the same fuel has only an indirect effect.

The IMO Net-Zero Framework, which would put a global price on emissions, has not been adopted. MEPC 85 meets from 30 November to 4 December 2026, and the adjourned extraordinary session is scheduled to resume on 4 December.

Three questions to ask before specifying a PM shaft generator

  1. Which baseline, load profile and fuel price sit behind the savings and payback figures, and were they checked by anyone outside the supplier?
  2. Which ships in the reference list run the same machine type, and can you speak to one of their owners or chief engineers?
  3. Where do the rotor magnets come from, and how could export licensing affect delivery times for new machines?

Sources: The Switch press presentation (Blue-C press tour, Bergen, September 2026); releases and technical pages of The Switch, BEMAC, Wärtsilä and Berg Propulsion; DNV; IMO GreenVoyage2050; International Energy Agency; Lloyd’s Register; ABB; CSIS; Energies (MDPI, 2025); Marine Log, MarineLink, The Motorship, Baird Maritime, Riviera and Splash247. Figures taken only from the press presentation are marked as company data. This article was researched with the help of AI tools and written, checked and edited by the editor.

English version / 返回英文

要点速览

  • 永磁轴带发电机从主机获取船上电力,而主机每千瓦时的油耗低于其所替代的辅助发电机组。
  • The Switch 表示,截至2026年6月已售出近600台船用永磁电机。其2026年9月的新闻发布资料显示订单为676台。两者均为公司数据。
  • 独立来源支持其物理原理,但规模小于宣传资料:国际海事组织(IMO)估计轴带发电机通常可减少1-5%的总排放。
  • 其旗舰直流项目,电池渡轮 China Zorrilla,于2026年9月抵达乌拉圭,尚未投入商业运营。
  • 战略问题在于磁体:2024年全球94%的烧结永磁体产自中国。

大多数远洋船舶在海上运行两套动力装置。大型二冲程主机驱动螺旋桨,而一组较小的四冲程发电机组为泵、冷藏箱、起重机和生活区供电。两者之中,主机的效率更高。The Switch 是一家芬兰电机制造商,现由日本 BEMAC 公司持有,其船舶业务正是建立在这一差距之上:将发电机直接安装在螺旋桨轴上,让主机承担船舶日常用电负荷。

该公司于2026年9月在卑尔根举行的 Blue-C 媒体考察活动中向记者介绍了其船舶产品组合。maritime-innovations.com 将这份演示资料中的关键说法与公司新闻稿、船级社和法规来源、船东声明以及行业媒体进行了核对。简而言之:这项技术是真实的并且销售迅速,核心数字需要背景说明,而最值得关注的未解问题在转子之中。

宣传背后的物理原理

永磁轴带发电机串联安装在主机与螺旋桨之间的螺旋桨轴上。转子采用永磁体而非励磁绕组,因此无需齿轮箱和滑环,需要散发的热量也更少。变频器,无论是独立驱动器还是 The Switch 的 DC-Hub,将变频输出转换为稳定的船舶电力,使发电机能够在主机的整个转速范围内工作。

The Switch 表示,二冲程主机的燃油效率通常比辅助发电机组高10-20%。独立来源确认了这一方向,但并未给出统一的数值区间。IMO 的 GreenVoyage2050 项目和曼恩能源方案(MAN Energy Solutions)均将大型二冲程主机较低的燃油消耗率视为轴带发电节油的原因。ABB 船舶与港口事业部是 The Switch 的客户,于2022年与其签订了 PMM2000M 电机的五年供货协议。ABB 在2022年11月宣布中远海运订单时表示,永磁轴带发电机的效率比传统同步轴带发电机高3-4%,在航行中比辅助发电机组的燃油效率最高可提高17%。由于 ABB 的系统采用 The Switch 的电机,这并非独立测量,但它表明一家大型系统集成商采用的数字与 The Switch 自己的数字接近。

“主机的燃油效率通常比辅助发电机高10-20%。”

The Switch 新闻演示资料,Blue-C 卑尔根媒体考察,2026年9月
约600
已售船用永磁电机,据 The Switch,2026年6月
1.5兆瓦
2014年订购的首批四台永磁轴带发电机的额定功率
40+兆瓦时
China Zorrilla 电池容量,经由 The Switch 直流保护装置接入
94%
2024年中国生产的烧结永磁体占全球份额(国际能源署)

从四台电机到数百台

该项目已有十余年历史。2014年2月,芬兰系统集成商 WE Tech 向 The Switch 订购了四台1.5兆瓦 PMM1000 电机,用于天津新港船厂为 Wallenius 建造的汽车运输船。首批机组于2014年11月在瓦萨通过了劳氏船级社监督下的工厂对拖试验。至于哪艘船首先在海上投用第一台批量机组,情况并不明确:新港建造的首艘船 Titus 于2018年交付,而 Terntank 的 Ternsund 被描述为约2016年首艘投入运行 WE Tech 永磁轴带发电机的船舶。因此,The Switch 所称”2015年交付全球首台兆瓦级永磁轴带发电机”只有日期,而没有公开的船名。

此后的增长在公司自己的新闻稿中有充分记录:2023年11月订单超过270台,2025年9月超过500台,2026年6月”售出近600台,约400台在运行”。2025年9月的里程碑伴随着一份订单:12台 PMM2000M 电机,每台额定功率4,210千瓦、转速50转每分钟,用于韩国船厂建造的一艘18,200标准箱集装箱船。

卑尔根的演示资料给出了更高的数字:订购676台,交付409台,涉及585艘船舶、81家船东、6个国家的58家船厂。按船型划分,集装箱船占订单的42%,气体运输船占25%,油轮占17%。作为同一订单簿的较新快照,这些数字是可信的,但它们没有出现在任何公开新闻稿中。在 The Switch 公布截止日期和定义之前,尤其是”电机”仅指轴带发电机还是也包括推进电机和发电机组,这些数字应被视为公司数据。

节油说法能证明什么,不能证明什么

演示资料承诺节油2-8%,投资回收期1-4年,与发电机组方案相比全生命周期节省500万至1,500万欧元,与传统轴带发电机相比节省200万至400万欧元。这些欧元数字均无法追溯到船东数据、船级社文件或同行评审研究。公司自己的公开资料则更为谨慎:根据不同文件,其常见问题解答给出的典型回收期为2-4年或3-4年。

独立估算的数字较小,但并未否定这项技术。IMO GreenVoyage2050 估计轴带发电机通常可减少1-5%的总排放,安装成本约为每千瓦450美元,即每艘船约50万至350万美元。2025年发表于《Energies》期刊的一项建模研究(Tadros 等,斯特拉斯克莱德大学)计算得出,一艘200米散货船在300-600千瓦电力负荷下每日可节油0.1-0.5吨,每年最多150吨,使用重油时的回收期中位数约为1-2.5年。这支持了演示资料回收期区间的下限,但它是模型计算,而非实测船队数据。合理的区间取决于比较基准:在长航程远洋船上替代辅助发电机组,与在支线船上替代旧式轴带发电机,是两种不同的情况。

可靠性说法同样需要审慎看待。公司报告称没有发生导致进坞或更换电机的故障。我们没有找到与此相矛盾的船级社或事故报告,但没有公开的故障记录并不等同于独立验证。演示资料中”接近1,000万运行小时”的说法,也明显高于 The Switch 在2026年4月至9月间为其船用永磁机队公布的500万至700万小时。

参考船舶:谁提供了什么

The Switch 是产品供应商。它不直接与船厂签约,而是向 WE Tech、瓦锡兰、Berg Propulsion、ABB、康士伯和 Vard 等系统集成商和原始设备制造商销售电机、驱动器和直流系统。以下船舶是其产品的参考案例。船舶的整体性能还取决于系统集成商的系统设计。

“我们认真履行产品供应商的角色,帮助客户向他们的客户交付完整的系统和解决方案。”

The Switch 新闻演示资料,2026年9月

China Zorrilla(Buquebus,Incat 第096号船)。这艘130米长的铝制双体船可载约2,100名乘客和225辆汽车,配备容量超过40兆瓦时的 Corvus 电池,不同来源报道为41-43兆瓦时。瓦锡兰是电气系统集成商,并提供了喷水推进器。The Switch 提供了 DC-Hub、使大型电池能够安全接入的电子限流器和电池短路限流器,以及岸电充电用电力电子设备。该船于2026年8月初前后在霍巴特装上重吊船 Black Marlin,并于9月抵达乌拉圭。调试和投入运营仍在进行中。目前没有关于 The Switch 设备出现问题的报道,但这艘渡轮尚不能作为性能参考。

North Sea Giant(North Sea Shipping)。这艘 DP3 水下施工船于2019年改装为混合动力运行,瓦锡兰为系统集成商,电池由 Corvus 提供。The Switch 提供了首台电子母线连接器(EBL),它以闭环方式连接各 DC-Hub,并在发生故障时于微秒级时间内分割电网。挪威船级社(DNV)报告称,该船可在仅运行一台发动机的情况下保持动力定位冗余,柴油机运行小时数减少约三分之一。演示资料称自2019年以来节省了1,977吨柴油,这一数字无法与船东或船级社数据相对应。

CSL Nukumi(加拿大轮船公司)。这艘由澄西船厂建造的26,000载重吨自卸船于2022年投入五大湖航线,采用 Berg Propulsion 的直驱系统。The Switch 提供了变速永磁发电机组、DC-Hub,以及约3兆瓦的无轴承推进电机,这些电机使用轴系轴承而非自身轴承。加拿大轮船公司报告称,与该航线上的前代船舶相比,温室气体排放降低约25%,有害空气污染物减少80%。

电机在哪里制造

三年内所有权两度变更。2024年2月,安川电机将 The Switch 出售给总部位于今治、创立于1946年的船舶电气供应商 BEMAC(控股股东),三井物产为少数股东。2026年5月15日,BEMAC 签署协议收购三井的剩余股份,The Switch 现称 BEMAC 为其唯一股东,并与三井保持战略合作关系。交易价格从未披露。据 The Switch 称,BEMAC 在日本造船业的市场份额超过50%。The Switch 继续作为独立公司运营,对其产品和业务承担全球责任。

The Switch 目前在两地制造船用永磁电机:芬兰拉彭兰塔(该地还设有可测试约18兆瓦驱动系统的试验中心)和中国南京。电力电子产品,包括 DC-Hub、驱动器和保护装置,来自芬兰瓦萨和挪威斯托尔德,公司还在斯托尔德参与 STEESMAT 低压直流测试网络。在南京,一家长期合作的制造伙伴已扩大其角色,开始为中国市场应用制造部分整机。演示资料中的客户名单以中国和韩国船厂为主。The Switch 表示芬兰和中国生产的电机完全相同,并按相同程序测试,这一说法尚未经过独立审计。

磁体问题

每个永磁转子都依赖钕铁硼磁体。根据国际能源署的数据,2024年中国供应了全球60%的磁体用稀土开采量、91%的精炼产量和94%的烧结永磁体。自2025年4月起,北京对七种中重稀土及含有这些元素的磁体实施出口许可管理,其中包括高温电机等级通常需要的镝和铽。2025年10月宣布的更广泛扩展措施已于2025年11月暂停至2026年11月10日,即本文发表后数周。此后对欧洲的磁体出口已基本恢复,而对美国的出货量仍低于2024年水平。出口商描述的是许可审批摩擦和每月波动的出口量,而非禁令。

The Switch 和 BEMAC 均未公开评论磁体来源、双重采购或无镝等级。对于买方而言,这与其说是单台电机的价格问题,不如说是新造船项目的交货期问题。更换转子并非常规问题:据 The Switch 称,其电机从未需要更换转子,磁体在正常运行中不会退化。对稀土磁体供应的依赖是影响所有永磁电机制造商的全行业问题,并非 The Switch 所特有。

法规有所助益,但不如宣传资料所示那样直接

根据 IMO 的 EEXI 和 EEDI 规则,轴带发电机的输出可以按主机油耗而非辅机油耗计算,从而在纸面上改善达到的指数。CII 则不同:它是运营评级,轴带发电机只有通过实际营运中节省的燃油才能改善评级。欧盟碳排放交易体系对2026年排放要求100%缴纳配额,在覆盖航次中每少燃烧一吨燃油都会减少所需配额,但没有针对特定技术的抵扣。欧盟海事燃料条例(FuelEU Maritime)衡量的是所用能源的温室气体强度,因此使用相同燃料运行的轴带发电机只有间接影响。

将为排放设定全球价格的 IMO 净零框架尚未通过。MEPC 85 将于2026年11月30日至12月4日召开,休会的特别会议计划于12月4日复会。

选用永磁轴带发电机前应提出的三个问题

  1. 节油和回收期数字背后的比较基准、负荷曲线和燃油价格是什么?是否经过供应商以外的机构核查?
  2. 参考名单中哪些船舶使用相同型号的电机?能否与其中一家船东或轮机长交流?
  3. 转子磁体来自哪里?出口许可可能如何影响新电机的交货期?

来源:The Switch 新闻演示资料(Blue-C 媒体考察,卑尔根,2026年9月);The Switch、BEMAC、瓦锡兰和 Berg Propulsion 的新闻稿及技术页面;DNV;IMO GreenVoyage2050;国际能源署;劳氏船级社;ABB;CSIS;《Energies》(MDPI,2025);Marine Log、MarineLink、The Motorship、Baird Maritime、Riviera 和 Splash247。仅来自新闻演示资料的数字已标注为公司数据。本文在人工智能工具辅助下完成调研,并由编辑撰写、核实和编辑。

This article was researched and drafted with the support of AI tools in line with Article 50 of the EU AI Act; all content was reviewed, fact-checked and approved by the editor.

Joachim Rosenoegger
Joachim Rosenoeggerhttps://www.maritime-innovations.com
Joachim Rosenoegger is the founder of ROBIN Business Information Pte Ltd (Singapore) and publisher of Maritime Innovations (maritime-innovations.com). He reports on maritime innovation, sustainability, and maritime cybersecurity with a focus on operator-relevant implementation details (retrofit constraints, compliance workflows, and practical adoption barriers). Expertise: maritime innovation storytelling, compliance and operations narratives, maritime cybersecurity communication Background: former contributor to Microsoft Digital Crimes Unit awareness work (cybercrime prevention and public communication) On-the-ground reporting: interviews and event coverage across maritime clusters and trade shows.
RELATED ARTICLES